1″ NPT Tap supplier- Taper, Plug and Bottom Taps
1-11 1/2 NPT Thread Tap-1-11.5 NPT Tap in HSS RH LH
- Type: NPT Tap
- Size: 1″
- TPI: 11 1/2
- Material: HSS (High speed steel) HSS-E
- Ground thread
- Finish: Bright
- Drill Size: 1.141
- Straight flute
- Flute Number: 4
1″-11.5 NPT left hand thread tap also available (RH=right hand LH= left hand), if need right hand thread tap, no need specially specified, if need left hand tap, it should be specified specially.
- Usually the 1″-11.5 NPT thread taps are bright without special coating, if clients need, we also can add special coatings, for example: TiN, TiCN, CrN or TiAlN. After coating, the taps’s working life can be improved greatly.
- Usually these taps supplied by individual ( plug tap is preferred), we also can send by sets ( Taper, plug and bottom)
- After Quenching treatment, the taps have a good wear – resistance.
- Our tap’ cutting effect is good with sharp cutting performance
- Good surface finish
- outstanding quality, high precision and excellent production reliability.
- Our taps can be used in through holes and blind holes.
NPT (American National Standard Taper) taps for general purpose use in a variety of materials conforming to ANSI standards are available. NPT thread taps cut internal threads in pipes.
Check the full range of NPT Thread Taps
We accept payment of T/T(bank transfer), Paypal, Credit Cards, and West Union etc.
|1/8″-27 NPT Tap||1/4″-18 NPT Tap||3/8″-18 NPT Tap||1/2″-14 NPT Tap|
|3/4″-14 NPT Tap||1″-11.5 NPT Tap||1 1/4″-11.5 NPT Tap||1 1/2″-11.5 NPT Tap|
|2″-11.5 NPT Tap|