M5x0.8 tap-M5 x 0.8 Metric thread tap in HSS bottom second taper

M5x0.8 thread taps

M5x0.8 thread taps supplier-bottom, second, and taper

M5 x 0.8 Metric thread taps- machine taps and hand taps

  • Type: Metric Tap
  • Size: 5
  • Pitch: 0.8
  • Material: HSS (High speed steel)
  • Ground thread

M5x0.8 left hand Metric thread tap also available (RH=right hand LH= left hand)

M5x0.8 thread taps

M5  Nominal Diameter: 5  P:0.8  d1=4  l=16 L=58 a=3.15  l2=6 all measures in mm

Our M5 x 0.8 Metric taps  can be supplied by sets and individual( one sets including three taps, taper, second and bottom), if  no specially specified, we will supply second taps for using. (In North America, second taps are often called “plug” tap. but in the U.K, bottom taps are often called plug taps. in order to avoid misunderstanding, we suggest all clients  using taper, second and bottom)

M5 x 0.8 taps’s material

W6Mo5Cr4V2 or W2Mo9Cr4VCo8 etc HSS

M5x0.8 thread taps’ hardness

65 HRC

We can supply straight-flute taps, spiral-flute taps, spiral-point taps and thread forming taps etc.

M5x0.8 straight flute tap

 

 

 

Straight-flute taps 

Straight-flute taps are the most commonly used tools for cutting interior thread. it is suited to be used in short holes   for rough material and brittle material’s thread holes.

M5 x 0.8 spiral flute taps

 

 

 

Spiral-flute taps 

Spiral-flute taps can effectively control discharge of chip, which have great advantage in cutting stainless steel etc material which is hard to machined.  often used in blind holes.

M5 x 0.8 spiral point taps

 

 

 

Spiral-point taps 

Spiral-point taps are interior thread cutting tools which push chips through holes ahead of the tool. it is suited to tapping high accuracy thread. often used in through holes.

M5 x 0.8 thread forming taps

 

 

 

Thread forming taps 

Thread forming taps are suited in cold-forming no chips processing crafts. press rather than cut to create threads        in a hole, no chips are created. these taps are widely used in aluminum alloy, brass etc material, mostly suited in          machining small holes’ thread within 6 MM.

Thread taps’ tolerance

thread taps’ tolerance : H1, H2, H3, H4. H1 used to machine 4H, 5H thread, H2 used to machine 5G, 6H thread           H3 used to machine 6G, 7H, 7G thread, H4 used to machine 6H, 7H thread.

About us

gaugestools is a professional supplier of thread taps, we can supply rich ranges of thread taps, including Metric taps, UN taps, ACME taps, BSPP taps, BSPT taps, NPT taps, and Trapezoidal taps etc.

Worldwide shipment , usually taking 3-4 days clients can receive goods. Our Metric thread taps are popular in America and Europe etc. 

Check the full range of Metric thread taps 

Standard

ISO 529

Payment

We accept payment of T/T(bank transfer), Paypal, Credit Cards, and West Union etc.

M5x0.8 thread taps qualityM5x0.8 thread taps delivery